4G 3db IPEX Wireless Antenna

4G Antenna

The antenna significantly improves signal quality and signal-noise ratio. It increases signal stability and decreases signal loss. It is suitable for situations in which signal quality is bad and rate is low.

Its interface is made of pure copper with small impedance. It is designed for LTE bands and supports 4G.

Its performance may be affected by various factors. Please make sure there is an applicable WIFI source near the antenna otherwise even if it can detect signals the signal strength may not be good enough for WiFi access.

Specifications 

Hardware Spec

• Frequency Range: 4G
• Gain: >. 2.15dBi
• V.S.W.R: <1.5
• Polarization: LinearVertical
• Max power rating: 50W 0
• Impedance: 50 OHW

Testing Conditions

• Voltage: 50V DC
• On-resistance: 30 OHM MAX 0

Time under High Voltage: lmS 0

Impedance: 5M OHM MIN

SMA Specifications

• Cycle: 500 cycles
• V.S.W.R.: 1.10 max
• Impedance: 5000mΩ
• Outer resistance: 2.5m OHM
• Inner resistance: 3m OHM
• R.M.S.: 1000V r.m.s
• Working Voltage: 335V max
• Frequency range: DC-12.4GHZ
• Impedance: 50 OHM
• Temperature Range: -55°C- +155°C

IPEX TO SMA Testing Conditions

• Voltage: 200V DC
• On-resistance: 0.5 OHM MAX
• Time under High Voltage: lmS
• Impedance: 10M OHM MIN

IPEX Specifications

• Cycle: 500 cycles min
• V.S.W.R.: 1.10 m + 0.025 max
•  Impedance: 5000mΩ min
• Outer resistance: 20
• Inner resistance: 10 R.M.S.: AC 200V
• Working Voltage: 60V max
• Frequency range: DC-6GHZ
• Impedance: 50 Ω
• Temperature Range: -40°C- +90°C