64GB eMMC Module for NanoPi

FLASH OS to eMMC Module:

+ Getan 8G SDHC card and backup its data if necessary. Download and extract the EFlasher image and the fhashing utility win32diskimager. Run the win32diskimager utility under Windows as administrator. On the utility's main window select your SD card's drive, your wanted image file and the EFlasher, and click on "write" to start flashing the image to your SD card. Under Linux you can run "dd" to flash the image file to your SD card.

+ After flashing is done take out the SD card and insert it to your board. Power on your board and it will be booted from the SD card and the EFlasher utility will be automatically launched. You can work with the EFlasher utility in multi-ple ways:

1: Connect an LCD or HDMI monitor and a USB mouse to your board and work with EFlasher's GUI to proceed;

2: Connect your board to a LAN, login into the board with SSH and type “eflasher" in a commandline utility and proceed with the prompts;(Note: when you login with SSH the username is root and the password is fa. Your board's IP address can be found by checking the router's system)

3: Login into your board via a serial terminal and type “eflasher" to proceed;

4; Connect an Icd2usb module to your board, press the K1 key on the LCD2USB module to select your wanted OS
and press the K2 key to confirm. The installation process will be shown on the Icd2usb's LCD;

+ After installation is done power off the board and take out the SD card from your board. Power on your board again
and it will be booted from eMMC;