BPI-9600 POE Module For BPI-P2 Zero

BPI-9600 POE Module For BPI-P2 Zero

• The BPI-9600 series of modules are designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet(PoE) standard. The BPI-9600 signature and control circuit provides the PoE compatibility signature and power classification required by the Power Sourcing Equipment (PSE) before applying up to 15W power to the port. The BPI-9600 provides a Class 0 signature.

  The DC/DC converter operates over a wide input voltage range and provides a regulated output. The DC/DC converter also has built-in short-circuit output protection.

  

  Features

  • IEEE802.3af compliant
  • Input voltage range 36V to 57V
  • Integral high efficiency DC/DC converter.
  • Low output ripple and noise
  • High performance with low price
  • Short-circuit protection
  • Adjustable Output
  • Optional multi-voltage output 3.3V 5V 12V 24V
  • Transformer isolation ,1500V isolation (input to output)
  • Easy to use, with a minimum number of external components.

  Applications

  • IoT gateway
  • IP Cameras
  • Wireless access point
  • Security and alarm systems
  • VOIP telephone
  • Point of sale network terminal equipment

  PBI-9600 PoE Hardware

  Module size

  

  Product Selector

  BPI-9600 PoE module
  Part Number	Nominal Output Voltage	Maximum Output Power	Marking	Package
  BPI-9600-3.3V	3.3V	6.6W	3.3V	SIL
  BPI-9600 -5V	5V	10W	5V	SIL
  BPI-9600 -12V	12V	12W	12V	SIL
  BPI-9600 -24V	24V	12W	24V	SIL

  • At 25°C with VIN = 48V

  Pin Description

  BPI-9600 PoE module
  Pin #	Name	Description
  1	VA1	RX Input (1). This input pin is used in conjunction with VA2 and connects to the centre tap of the transformer connected to pins 1 & 2 of the RJ45 connector (RX) - it is not polarity sensitive.
  2	VA2	TX Input (2). This input pin is used in conjunction with VA1 and connects to the centre tap of the transformer connected to pins 3 & 6 of the RJ45 connector (TX) - it is not polarity sensitive.
  3	VB1	Direct Input (1). This input pin is used in conjunction with VB2 and connects to pin 4 & 5 of the RJ45 connector - it is not polarity sensitive.
  4	VB2	Direct Input (2). This input pin is used in conjunction with VB1 and connects to pin 7 & 8 of the RJ45 connector - it is not polarity sensitive.
  5	-VDC	DC Return. This pin is the return path for the +VDC output.
  6	+VDC	DC Output. This pin provides the regulated output from the DC/DC converter.

  Absolute Maximum Ratings

  BPI-9600 PoE module
  	Parameter	Symbol	Min	Max	Units
  1	DC Supply Voltage	VCC	-0.3	60	V
  2	DC Supply Voltage Surge for 1ms	VSURGE	-0.6	80	V
  3	Storage Temperature	TS	-40	100	OC

  Note 1: Exceeding the above ratings may cause permanent damage to the product. Functional operation under these conditions is not implied. Maximum ratings assume free airflow.

  Recommended Operating Conditions

  BPI-9600 PoE module
  	Parameter	Symbol	Min	Typ	Max	Units	Units
  1	Input Supply Voltage1	VIN	36	48	57	V	V
  2	Under Voltage Lockout	VLOCK	30		36	V	V
  3	Operating Temperature2	TOP	-20	25	70	Ta / OC	BPI-9600

  Note

  • 1: With minimum load
  • 2: See Section Operating Temperature Range

  Extended use close to, or at the maximum operating temperature can reduce the life time of the device.

  DC Electrical Characteristics

  

  Note

  • 1: Typical figures are at 25°C with a nominal 48V supply and are for design aid only. Not Guaranteed
  • 2: The output ripple and noise can be reduced with an external filter, see application note.
  • 3: Continuous short circuit duration is applicable at 25'C ambient temperature in free air. At higher temperatures or with restricted

  airflow (e.g. in a sealed enclosure) the duration will need to be limited to avoid overheating.

  Typical Connection Diagram