Sipeed SLogic Combo 8 Slogic Analyzer DAPLink CKLink Debugger Tool
4 in 1 multifunctional Maximum 8 channels logic analyzer
1. Introduction
Sipeed SLogic Combo 8 is a development tool with functions of logic analyzer, CKLink debugger, DAP-Link debugger and USB2UART, which can be switched arbitrarily by buttons.
In Windows environment, the Sipeed SLogic Combo 8 has maximum transmission bandwidth of 160 Mb/s. The typical configuration includes 80M@2CH and 40M@4CH.
2.CKLink Function Parameters
CKLink |
SLogic Combo 8 |
JTAG Clock Rate |
16M |
Typical Dump Speed |
1200KB/s |
Debug Serial Port |
Up to 20Mbps |
2.3. DAPLink Function Parameters
DAPLink |
SLogic Combo 8 |
Debug Serial Port |
Up to 20Mbps |
Typical Burning Speed |
110KB/s |
2.4. UART Function Parameters
High Speed Four Serial Ports |
SLogic Combo 8 |
Maximum Baud Rate |
2x20Mbps+2x1Mbps |
Total Bandwidth |
42Mbps |
Sipeed SLogic Combo 8 has four functions (SLogic, CKLink Debugger, DAP-Link Debugger, USB2UART). This document is intended to guide you on how to select the functions.
1. Button Functions
After power on, press the button to switch functions, and you can see the indicator light change when the switching is successful.
(Up:The red box indicates the position of the function switch button)
Note: When switching functions, do not press the button more frequently than every 100ms; otherwise, it may cause the module to enter boot mode, and you will see that the indicator light will no longer change. If you encounter this situation, try to restart the power supply.
2. Indicator Light Color and Functions
Each function corresponds to a specific color, and you can determine the currently enabled function based on the indicator light color.
Function |
Slogic |
DAPLink |
USB2UART |
CKLink |
Indicator Light Color |
Blue |
Green |
Red |
Yellow |
(Up:Table of Indicator Light Color and Functions)
3. Panel Information
You can check the current function and corresponding wire sequence through the panel information:
- The left side shows the wire sequence for CKLink (Yellow)and DAPLink (Green) together, as their wire sequences are similar.
- The middle section shows the wire sequence for UART (Red).
- The right side shows the wire sequence for SLogic (Blue).
(Above:Color/Function/Wire Sequence Correspondence Diagram)
Here's an example:
- If you want to use the SLogic function, press the button to switch the indicator light to blue. This will enable the SLogic function, and you can find the pin wire sequence for SLogic under the blue font on the panel.
- If you want to use the UART function, press the button to switch the indicator light to red. This will enable the UART function, and you can find the pin wire sequence for UART under the red font on the panel.
Alright, now you can switch to the function you need and proceed to the next step!
For more information about Sipeed SLogic Combo 8, please contact us.
Specifications
At Check our you will see 2 different options for deliveries. Expedited Shipping with FEDEX and DHL. And Economy Shipping. Expedited Shipping is around 4-7 days by FEDEX or DHL. Economy Shipping is around 12-20 Days depending on the Zip Code.
Payment Methods Accepted
- American Express
- Apple Pay
- Diners Club
- Discover
- Meta Pay
- Google Pay
- Mastercard
- Shop Pay
- Visa
Policies
If you have any questions, please contact us at sales@genovaindustrial.com.
Return and Refund Policy
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return. The shipping cost of the returned product belongs to our company. Opening the outer packaging of the product will not have a negative impact in case of return.
Eligibility for Returns
To be eligible for a return, your item must meet the following conditions:
- The item must be in the same condition that you received it or slightly used maybe for testing purpose.
- You must have the receipt or proof of purchase.
How to Start a Return
To initiate a return, please contact us at sales@genovaindustrial.com. If your return is accepted, we will send you a return shipping label along with instructions on how and where to send your package. You can mail it or drop it off at the specified FedEx locations.
For any questions regarding returns, you can always contact us at sales@genovaindustrial.com.
Damages and Issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item. This will allow us to evaluate the issue and make it right.
Exceptions / Non-returnable Items
Unfortunately, we cannot accept returns on gift cards. If you have any questions or concerns about your specific item, please get in touch with us.
Exchanges
The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, make a separate purchase for the new item.
Refunds Policy
Once we’ve received and inspected your return, we will notify you whether your refund has been approved. If approved, you’ll be automatically refunded on your original payment method. Please remember it may take some time for your bank or credit card company to process and post the refund. Refund process may take up to 7 business days.
Thank you for shopping with Antallia Enterprises Inc, dba Genova Industrial Products. We value your business and are committed to providing you with high-quality electronic products and excellent customer service.
Contact
For more information about our privacy practices, if you have questions, or if you would like to make a complaint, please contact us by e-mail at sales@genovaindustrial.com or by mail using the details provided below:
Antallia Enterprises Inc
5055 Canyon Crest Dr, Ste 123, Riverside CA 92507, United States