Passer aux informations produits
1 de 8

Friendly Elec

S70B 7 inch resistive touch screen LCD 800x480

Prix habituel $34.90
Prix habituel Prix soldé $34.90
Vente Épuisé
Frais d'expédition calculés à l'étape de paiement.
Delivery Guarantee

Delivery Guarantee

Technical Support

Technical Support

The S7OB LCD is a FriendlyElec developed LCD with resistive touch panel. Its resolution is 800 x 480. Its back-light is adjustable via FriendlyElec' s one-wire technology. It works with FriendlyElec's Mini6410, Mini210S, Tiny4412 and NanoPi 2 under Linux, WinCE and Android. Its driver is open source.

The S7OB has a white ABS bezel with mounting holes making it easily deployed in various situations Note: we have a more detailed introduction to the one-wire technology in the appendix.



Resolution 800 x 3(RGB) x 480
Technology Type
a-Si TFT active matrix
Touch Panel
Dot Pitch 0.0642 (W) x 0.1790 (H) (mm)
Active Area
154.08 (W) x 85.92 (H) (mm)
Module Size
164.9 (W) x 100.0 (H) x 5.7 (D)(mm)
Color Arrangment
RGB Stripe
Power Supply


We observed that for One-Wire Technology on development boards using CPU' s ADC conversion didn't work well, especially for large-size LCDs (7" and larger) with four-wire resistive touch. Some vendors use an external USB or UART module to connect these LCDs. To save CPU' s hardware resources and minimize usage of external modules we developed the one-wire technology which only uses a single GPIO pin and we have integrated this technology in all our LCD controller boards. This technology uses an MCU to communicate with the touch panel' s chip (we use the ADS7843 chip or other chips compatible with ADS7843) and process the four-wire resistor' s ana log signals and output the filtered stable signals to the development board via GPIO. We tested this technology in various LCDs and it worked very well even for a large LCD of 19" and some commonly observed issues such as screen flipping and jittering were not encountered.

Today most LCDs whose size is less than 12" have LED backlight. We use the one-wire' s MCU to process the backlight as well. The backlight is set with a range of values. Users can set a value to the backlight and this value is passed to MCU for processing via one-wire' s GPIO pin. Each FriendlyELEC' s LCD module has a unique ID which is saved in the one-wire' s MCU. When the MCU reads the ID information from GPIO signals it will recognize the LCD model and instruct the bootloader to load the corresponding LCD driver, making a FriendlyELEC LCD plug and play. As for the one-wire technology for our LCDs with capacitive touch we removed the resistive touch panel' s chip but kept the backlight adjusting function and LCD's ID information. Therefore the communication between the capacitive touch and the development board is still standard IIC.

Please note that the one-wire technology is different from the commonly known single-bus communication. Actually in the development board we use a PWM timer (not PWM pins) to generate the communication frequency (9600Hz). For more details please refer to the driver' s source code.

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at

Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.

The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.

Please contact us for shipping charges and additional information.

There are no reviews for this product yet...