This module is designed specifically for expand for the GPIO of the Banana Pi a which can effectively solve the banana send IO port insufficient. It use PCF8574 chip to expand 8 Bidirectional IO. The module connection to the Banana Pi through I2C bus. There are 8 I2C address in the module and user can choose one of them through setup the “ADDR” jumper. User also can choose 5V or 3.3V electric level. Module with isolation protection, can effectively prevent external high voltage damage to the Banana Pi. Multiple module can cascade.
Product Features
- 8 Bidirectional IO
- 8 I2C-address
- Isolation protection
- Use wiringPi API , sample code
- 100 kHz I2C-bus interface (Standard-mode I2C-bus)
- Banana Pi insert port
- Banana Pi cascade port
- EXT0-EXT7 expand GPIO
- Electric level selection jumper
- I2C-address selection jumper
- Working voltage: 2.5V-6V
- IO voltage: 3.3V or 5.5
- Expand 8 Bidirectional IO
- I2C bus
- 100 kHz I2C-bus interface (Standard-mode I2C-bus)
- −40°C to +85°C operation
- LED signs and displays
- Key pads
- Instrumentation and test measurement
- Driver numeric display
- Drive the lattice screen
Insert the module that the silk screen says “BPI IN”. Pay attention don’t make the direction reversed! The correct direction of insert module is above the Banana Pi’s PCB; EXT0-EXT7 are expand GPIO user can use DuPont Line to connection peripheral. The header which near silk screen write ”EXT” expand GPIO of Banana Pi, user can cascade the other module or the same module. If you want switch the electric level, just setup the jumper
The PCF8574/74A provides general-purpose remote I/O expansion via the two-wire bidirectional I2C-bus (serial clock (SCL), serial data (SDA)).
The devices consist of eight quasi-bidirectional ports, 100 kHz I2C-bus interface, three hardware address inputs and interrupt output operating between 2.5 V and 6 V. The quasi-bidirectional port can be independently assigned as an input to monitor interrupt status or keypads, or as an output to activate indicator devices such as LEDs. System master can read from the input port or write to the output port through a single register.
The low current consumption of 2.5uA (typical, static) is great for mobile applications and the latched output ports directly drive LEDs.
The PCF8574 and PCF8574A are identical, except for the different fixed portion of the slave address. The three hardware address pins allow eight of each device to be on the same I2C-bus, so there can be up to 16 of these I/O expanders PCF8574/74A together on the same I2C-bus, supporting up to 128 I/Os (for example, 128 LEDs).
The active LOW open-drain interrupt output (INT) can be connected to the interrupt logic of the microcontroller and is activated when any input state differs from its corresponding input port register state. It is used to indicateto the microcontroller that an input state has changed and the device needs to be interrogated without the microcontroller continuously polling the input register via the I2C-bus. The internal Power-On Reset (POR) initializesthe I/Os as inputs with a weak internal pull-up 100uA current source.
Specifications
At Check our you will see 2 different options for deliveries. Expedited Shipping with FEDEX and DHL. And Economy Shipping. Expedited Shipping is around 4-7 days by FEDEX or DHL. Economy Shipping is around 12-20 Days depending on the Zip Code.
Payment Methods Accepted
- American Express
- Apple Pay
- Diners Club
- Discover
- Meta Pay
- Google Pay
- Mastercard
- Shop Pay
- Visa
Policies
If you have any questions, please contact us at sales@genovaindustrial.com.
Return and Refund Policy
We have a 14-day return policy, which means you have 14 days after receiving your item to request a return. The shipping cost of the returned product belongs to our company. Opening the outer packaging of the product will not have a negative impact in case of return.
Eligibility for Returns
To be eligible for a return, your item must meet the following conditions:
- The item must be in the same condition that you received it or slightly used maybe for testing purpose.
- You must have the receipt or proof of purchase.
How to Start a Return
To initiate a return, please contact us at sales@genovaindustrial.com. If your return is accepted, we will send you a return shipping label along with instructions on how and where to send your package. You can mail it or drop it off at the specified FedEx locations.
For any questions regarding returns, you can always contact us at sales@genovaindustrial.com.
Damages and Issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged, or if you receive the wrong item. This will allow us to evaluate the issue and make it right.
Exceptions / Non-returnable Items
Unfortunately, we cannot accept returns on gift cards. If you have any questions or concerns about your specific item, please get in touch with us.
Exchanges
The fastest way to ensure you get what you want is to return the item you have. Once the return is accepted, make a separate purchase for the new item.
Refunds Policy
Once we’ve received and inspected your return, we will notify you whether your refund has been approved. If approved, you’ll be automatically refunded on your original payment method. Please remember it may take some time for your bank or credit card company to process and post the refund. Refund process may take up to 7 business days.
Thank you for shopping with Antallia Enterprises Inc, dba Genova Industrial Products. We value your business and are committed to providing you with high-quality electronic products and excellent customer service.
Contact
For more information about our privacy practices, if you have questions, or if you would like to make a complaint, please contact us by e-mail at sales@genovaindustrial.com or by mail using the details provided below:
Antallia Enterprises Inc
5055 Canyon Crest Dr, Ste 123, Riverside CA 92507, United States