跳至产品信息
1 / 10

Sipeed

Sipeed SLogic Combo 8 Slogic Analyzer Debugger Tool

In stock: 1500 available.

常规价格 $11.80
常规价格 促销价 $11.80
销售额 售罄
结账时计算的运费

Sipeed SLogic Combo 8 Slogic Analyzer DAPLink CKLink Debugger Tool

4 in 1 multifunctional Maximum 8 channels logic analyzer

1. Introduction

Sipeed SLogic Combo 8 is a development tool with functions of logic analyzer, CKLink debugger, DAP-Link debugger and USB2UART, which can be switched arbitrarily by buttons.

In Windows environment, the Sipeed SLogic Combo 8 has maximum transmission bandwidth of 160 Mb/s. The typical configuration includes 80M@2CH and 40M@4CH.


2.CKLink Function Parameters

CKLink

SLogic Combo 8

JTAG Clock Rate

16M

Typical Dump Speed

1200KB/s

Debug Serial Port

Up to 20Mbps


2.3. DAPLink Function Parameters

DAPLink

SLogic Combo 8

Debug Serial Port

Up to 20Mbps

Typical Burning Speed

110KB/s


2.4. UART Function Parameters

High Speed Four Serial Ports

SLogic Combo 8

Maximum Baud Rate

2x20Mbps+2x1Mbps

Total Bandwidth

42Mbps


Sipeed SLogic Combo 8 has four functions (SLogic, CKLink Debugger, DAP-Link Debugger, USB2UART). This document is intended to guide you on how to select the functions.


1. Button Functions

After power on, press the button to switch functions, and you can see the indicator light change when the switching is successful.

(Up:The red box indicates the position of the function switch button)

Note: When switching functions, do not press the button more frequently than every 100ms; otherwise, it may cause the module to enter boot mode, and you will see that the indicator light will no longer change. If you encounter this situation, try to restart the power supply.

 

2. Indicator Light Color and Functions

Each function corresponds to a specific color, and you can determine the currently enabled function based on the indicator light color.

Function

Slogic

DAPLink

USB2UART

CKLink

Indicator Light Color

Blue

Green

Red

Yellow

(Up:Table of Indicator Light Color and Functions)

 


3. Panel Information

You can check the current function and corresponding wire sequence through the panel information:

  • The left side shows the wire sequence for CKLink (Yellow)and DAPLink (Green) together, as their wire sequences are similar.
  • The middle section shows the wire sequence for UART (Red).
  • The right side shows the wire sequence for SLogic (Blue).

(Above:Color/Function/Wire Sequence Correspondence Diagram)

Here's an example:

  1. If you want to use the SLogic function, press the button to switch the indicator light to blue. This will enable the SLogic function, and you can find the pin wire sequence for SLogic under the blue font on the panel.
  2. If you want to use the UART function, press the button to switch the indicator light to red. This will enable the UART function, and you can find the pin wire sequence for UART under the red font on the panel.

Alright, now you can switch to the function you need and proceed to the next step!

For more information about Sipeed SLogic Combo 8, please contact us.

Specifications

Spec Spec-1

Shipping Policy

At Antallia Enterprises Inc., doing business as Genova Industrial Products, we are committed to processing and shipping your orders swiftly, efficiently, and transparently. Below, we outline our shipping practices, including delivery times, order tracking, and contact information for support.

 

Order Processing

We prioritize efficient order processing to ensure prompt delivery:

  • Once you place an order and complete the payment, you will receive a confirmation email with a summary of your order and Order Number.
  • Please check your spam, notification, newsletter folders in your email to make sure you received the order confirmation.
  • If you didn’t receive the order confirmation to your email, please contact us at the contact information written at the bottom of this policy.
  • Paid Orders' handling time is generally 1-2 business days.

 

Shipping Locations and Times

Our shipping services cover various regions globally. Orders are shipped from our primary location in Riverside, CA.

 

Estimated Delivery Times:

  • Paid Orders: 3-5 business days.
  • The total delivery time, including order processing and shipping, is estimated to be 4–7 business days from the date of purchase.
  • Remote Areas: Deliveries may take an additional 2-3 business days due to the remote locations.

Note: Unforeseen events such as postal delays, extreme weather conditions or customs inspections may occasionally impact delivery times. In such cases, we will notify you promptly via email or phone.

 

Shipping Carriers

  • Orders which are paid with Global Express shipping are delivered by DHL or FedEx.
  • All orders are trackable on our website.

 

Order Tracking and Insurance

  • All orders are insured and come with tracking details for peace of mind. Once your order has shipped, you will receive a tracking number to monitor its progress on our Order Tracking page.

 

Address Changes

Please ensure your address details are accurate at the time of order. Once an order is shipped, we cannot modify the delivery address. If an incorrect address is provided and results in a lost or unrecoverable package, the customer assumes responsibility for the loss. Antallia Enterprises Inc. will not replace or refund such orders.

 

Countries We Ship To

We deliver all around the United States.

 

Contact Information

For any shipping-related inquiries or if you need further assistance, please contact us:

If you are not fully satisfied with our response to your complaint, you have the right to escalate your concerns to the relevant data protection authority. You may choose to reach out to your local data protection authority or contact our designated supervisory authorities using the following resources:

Return and Refund Policy

Antallia Enterprises Inc., dba Genova Industrial Products
Returns and Refunds Policy

At Antallia Enterprises Inc., we are committed to ensuring customer satisfaction with each purchase. If you are not completely satisfied with your order, please review our return policy below for details on eligibility and the returns process.

 

14-Day Return Policy

You have 14 days from the date of receiving your item to request a return. We will cover the shipping costs for the returned product, and opening the product’s outer packaging does not impact return eligibility.

 

Eligibility for Returns

To qualify for a return, please ensure your item meets the following conditions:

  • Return Merchandise Authorization (RMA): Initiate an RMA request to begin the return process. Once approved, we will send you a return shipping label and instructions on where to send the product.
  • Condition: The item should be in the same condition as when received, with only minimal usage (such as testing) permitted.
  • Proof of Purchase: Provide your order number, receipt, or other proof of purchase.
  • Secure Packaging: Use the original packaging or equivalent to protect the product during transit, ensuring it arrives safely.

 

How to Start a Return

To initiate a return, please contact us at sales@genovaindustrial.com. If your return is accepted, we will provide you with an RMA number, a return shipping label, and instructions on how and where to send your package. You may choose to mail it or drop it off at a designated FedEx location.

For further questions regarding returns, please contact us at sales@genovaindustrial.com.

 

Damages and Issues

Please inspect your order upon receipt. If your item is defective, damaged, or incorrect, contact us immediately so we can evaluate the issue and take corrective action.

 

Exceptions / Non-Returnable Items

Certain items cannot be returned, including: Gift Cards

    If you have questions about whether your item is eligible for return, please contact us for clarification.

     

    Exchanges

    The quickest way to receive your desired item is to process a return for the unwanted item and then make a separate purchase for the new product.

     

    Refunds Policy

    After we receive and inspect your returned item, we will notify you of the approval or rejection of your refund. Approved refunds will be issued to your original payment method. Please allow up to 7 business days for the refund to be processed. Note that your bank or credit card company may require additional time to post the refund.

     

    Customer Support Contact Information

    For more information or assistance, please contact us by email or mail:

    Email: sales@genovaindustrial.com
    Mailing Address:
    Antallia Enterprises Inc.
    5055 Canyon Crest Dr, Ste 123
    Riverside, CA 92507, United States

    Phone+1 213 476 72 69

     

    If you are not fully satisfied with our response to your inquiry or complaint, you have the right to escalate your concerns to a relevant data protection authority. You may reach out to your local data protection authority or use the following resources:

    Thank you for choosing Antallia Enterprises Inc., dba Genova Industrial Products. We value your business and are committed to delivering high-quality products and outstanding customer service.

    Payment Policy

    Accepted Payment Methods

     

    We accept the following payment options to ensure flexibility and convenience for our customers:

      • American Express
      • Apple Pay
      • Diners Club
      • Discover
      • Meta Pay
      • Google Pay
      • Mastercard
      • Shop Pay
      • Visa
      • Paypal 

        If you have questions about a specific payment method or encounter issues, please reach out to our support team at sales@genovaindustrial.com.

         

        Payment Processing

        • All payments are processed securely using encrypted connections to ensure the safety and confidentiality of your payment information.
        • We do not store credit card details on our servers after a transaction is completed.
        • Once your order is successfully placed, you will receive an order confirmation email with your purchase details. Please retain this for your records.

         

           

          Payment Issues

          If you encounter problems during the payment process, such as declined transactions or technical errors, consider the following troubleshooting steps:

            • Step 1:  Confirm that you are using a valid and supported payment method.
            • Step 2: Verify that your billing information matches the details associated with your payment method.
            • Step 3: Ensure sufficient funds are available in your account or payment method.
            • Step 4: If using a digital wallet (e.g., Apple Pay, Google Pay), confirm that your wallet is set up correctly.

            If the issue persists, please contact our customer service team at sales@genovaindustrial.com for immediate assistance. We are here to help resolve any concerns promptly.

             

            Transaction and Related Fees

            • No additional fees are charged by Genova Industrial Products for using the listed payment methods.
            • However, please note that your bank or payment provider may apply certain fees, such as international transaction fees or currency conversion fees. These charges are independent of our store, and we recommend contacting your financial institution for details if applicable.

             

            Fraud Prevention

            To maintain a secure shopping environment, all transactions are subject to verification and fraud prevention checks. If we identify any discrepancies, we may contact you to verify your details before processing the order.

             

            Returns and Refunds

            If a payment refund is necessary due to a return, we will refund the full amount to the original payment method within 7 business days of processing the return. For more details, please review our Return and Refund Policy.

             

            Additional Policies

            We encourage you to review the following related policies for more information:

             

            Contact Information

            If you have any questions regarding our payment methods or any other policies, please contact us at sales@genovaindustrial.com or call +1 213 476 72 69.

             

            Custom Product
            Custom Request