Sipeed M1s Dock AI+IoT BL808 tinyML RISC-V Linux Artificial Intelligent Development Board
1. Summary
Sipeed Maix 1 M1S Board with Dock is a development board designed based on Sipeed M1s module,routes interface like MIPI CSI、SPI LCD and FPC connector, to get rid of worries about connecting cable. Designed with the most minimal design, for customers to evaluate the module, or hobbyists to play directly, etc.
2. Video
Video of M1s Dock and M0Sense:M1s Dock is before 3:15,and time after 3:15 is M0Sense.
3. Features
- MainChip BL808 RISC-V 480Mhz + NPU BLAI-100
- Onboard USB to UART debugger
- Onboard screen interface (Optional 1.69-inch 240x280 capacitor touch screen)
- Onboard MIPI camera interface (Optional 2M solution camera)
- Support 2.4G WIFI / BT / BLE
- Onboard 1 analog microphone、1 LED、1 TF card slot
- Route USB-OTG to USB Type-C port
3.1. Parameters
M1s Dock | |
---|---|
M1s Module | |
Three RISC-V CPUs: · RV64GCV 480MHz · RV32GCP 320MHz · RV32EMC 160MHz |
|
AI NN general purpose hardware accelerator: · BLAI-100, used for video/audio detection/identification,100GOPS hashrate |
|
768KB SRAM + 64MB UHS PSRAM | |
Encode and Decode - MJPEG and H264(Baseline/Main) - 1920x1080@30fps + 640x480@30fps |
|
Interface: - Camera interface :DVP and MIPI-CSI - Display interface:SPI、DBI、DPI(RGB) |
|
Wireless: - Support Wi-Fi 802.11 b/g/n - Support Bluetooth 5.x Dual-mode(BT+BLE) - Support Wi-Fi / BT co-existence |
|
USB 2.0 HS OTG | |
Onboard components | |
Onboard USB to UART debugger (Used for uart communication and burn firmware) | |
Onboard screen interface (Optional 1.69-inch 240x280 capacitor touch screen) | |
Onboard MIPI camera interface (Optional 2M solution camera) | |
Onboard 1 analog microphone、1 LED、1 TF card slot | |
Others | |
3D model file:Click me | |
External TYPE-C PORT power supply requirements: 5V±10% 0.5A |
|
Temperature rise: <30K | |
Operating temperature:-10℃ ~ 65℃ |
3.2. Chip Cores
Three cores in chip: M0,D0,LP。
M0 | D0 | LP |
---|---|---|
T-HEAD E907@320MHz | T-HEAD C906@480MHz | T-HEAD E902@160MHz |
3.3. Function Block
3.4. Dimenssion
3.5. Pinmap
4. Compariso
Item | Maix Bit | ESP32 cam | M1s Dock |
---|---|---|---|
MainChip | K210 | ESP32 | M1s(BL808) |
Camera | 0.3MP DVP GC0328 | 2MP DVP OV2640 with flash LED | 2MP MIPI OV2685(two-side) with flash LED |
Screen | 2.4 inch 320x240 | 1.68 inch 280x240 capacitive touch screen | |
Audio | I2S MEMS MIC | Analog MEMS MIC + LineOut | |
SD Card Slot | SPI mode | SPI mode | · SDHC mode · JTAG mode |
Key | Reset Boot |
Reset | · Reset · Boot · User x 2 |
USB | USB to Serial x 1 | · USB to Dual Serial x 1 · USB OTG HS |
|
Other | 4P x 1.25mm connector(UART port) | ||
Pin | · 2 x 18 pins · bread board friendly |
2 x 8 pins | · 2 x 16 pins · bread board friendly |
JTAG | Optional TF2JTAG | ||
Shell | Optional | ||
Size | 25 x 53 mm | 27 x 41 mm | 27 x 55 mm |
5. Software
M1s Dock | |
---|---|
OS | · Full support for FreeRTOS · Basic support for Linux |
Developments | · C SDK · MaixHAL C · PikaPython |
Burn Firmware | · Burn from uart · Virtual disk drag-and-drop burn |
AI Framework | · Support BLAI accelerated inference engine with native SDK · Suppory universal TinyMaix inference |
AI model store | · Download from MaixHub. Support Face detection and recognition, posture detection and gesture detection, etc. |
Sipeed examples | · https://github.com/sipeed/M1s_BL808_example |
6. Operators list
Type | Operators | Applicable Subset Spec. | Processor |
---|---|---|---|
Convolution | Conv | Kernel: 1x1,3x3,5x5,7x7 | :strong:NPU
|
Stride: 1x1, 2x2 | |||
Dilation: 1x1, 2x2 | |||
Pad: same | |||
Depthwise Conv | Kernel: 1x1,3x3 (5x5, 7x7 TBD) | :strong:NPU
|
|
Stride: 1x1, 2x2 | |||
Dilation: 1x1 (2x2 TBD) | |||
Pad: same | |||
Transpose Conv | Kernel: 3x3 | strong:NPU
|
|
Stride: 2x2 | |||
Pooling | MaxPool (NPU TBD) | Kerenl: 2x2 | DSP |
Stride: 2x2 | |||
MaxPool | Kerenl: 3x3 | :strong:NPU
|
|
Stride: 1x1, 2x2 | |||
Activation | Relu | :strong:NPU
|
|
Relu 6 | :strong:NPU
|
||
Other processing | BatchNormalization | fused with conv | :strong:NPU
|
Add (shortcut) | :strong:NPU
|
||
Concat (route) | Channel wise (AXIS 3 in BHWC) | :strong:NPU
|
|
Fully Connected | :strong:NPU
|
||
Upsample | Nearest | :strong:NPU
|
7. Attention
Item | Attention |
---|---|
Electrostatic protection | Avoid static electricity hitting the PCBA. Release the static electricity of hand before touching the PCBA |
Operating voltage | The operating voltage of each GPIO has been marked in the schematic. Please do not allow the actual operating voltage of the GPIO to exceed the rated value, otherwise the PCBA will be permanently damaged |
FPC Connector | When connecting FPC cable,make sure that the row is completely inserted into the row without bias |
Plug and Remove | Power off completely before plugging or removing it |
Avoid short circuit | During the power-on, avoid any liquid or metal touching PCBA components,otherwise the PCBA will be damaged even burn |
For more information about Sipeed Maix I M1S Board, please contact us
We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at alex@friendlyarmtr.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
You can always contact us for any return question at alex@friendlyarmtr.com.
Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.
Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.
Unfortunately, we cannot accept returns on sale items or gift cards.
Exchanges
The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.
Please contact us for shipping charges and additional information.
There are no reviews for this product yet...