Skip to product information
1 of 8

Sipeed

Sipeed Tang Nano 9K FPGA Development Board

Regular price $14.80
Regular price Sale price $14.80
Sale Sold out
Shipping calculated at checkout.
Delivery Guarantee

Delivery Guarantee

Technical Support

Technical Support

Sipeed Tang Nano 9K FPGA Development Board GOWIN GW1NR-9 RISC-V   HDMI FPGA Development Board Module 1.14/4.3/5/7 Inch Bare Screen

 

1. Introduction

Sipeed Tang Nano 9K is a development board based on Gowin GW1NR-9 FPGA chip. Tang Nano 9K equips with HDMI connector, RGB screen interface connector, SPI screen connector, 32Mbit SPI flash and 6 LEDs, so users can use it for FPGA verification, risc-v soft core verification and basic function verification easily. Sipeed Tang Nano 9K's 8640 LUT4 logic units can not only be used for various complex logic circuits designing, but also used for running a complete PicoRV soft core. Tang Nano 9K also meets various needs of users, such as learning FPGA, verifying soft core and further design.

 

2. Comparison

Tang Nano 9K is the 5th product of Sipeed Tang series. Before purchasing, you can compare and choose from the following table according to your demands:

Model

Tang Nano 1K

Tang Nano 4K

Tang Nano 9K

Appearance

Logic Units (LUT4)

1152

4608

8640

Hard core processor

/

Cortex m3

/

Crystal oscillator

27MHZ

27MHZ

27MHZ

Display interface

RGB screen interface

HDMI

HDMI,
RGB screen interface,
SPI screen interface

Camera

/

Support OV2640

/

External SPI FLASH

Reserved pads only

32Mbits SPI flash

32Mbits SPI flash

TF card slot

/

/

Yes

Debugger

Onboard USB-JTAG

Onboard USB-JTAG

Onboard USB-JTAG & USB-UART


3. Characteristic

This form shows detail specs of Tang Nano 9K

Item

value

Logic units(LUT4)

8640

Registers(FF)

6480

ShadowSRAM SSRAM(bits)

17280

Block SRAM BSRAM(bits)

468K

Number of B-SRAM

26

User flash(bits)

608K

SDR SDRAM(bits)

64M

18 x 18 Multiplier

20

SPI FLASH

32M-bit

Number of PLL

2

Display interface

HDMI interface, SPI screen interface and RGB screen interface

Debugger

Onboard BL702 chip provides USB-JTAG and USB-UART functions for GW1NR-9

IO

• support 4mA、8mA、16mA、24mA other driving capabilities
• Provides independent Bus Keeper, pull-up/pull-down resistors, and Open Drain output options for each I/O

Connector

TF card slot, 2x24P 2.54mm Header pads

Button

2 programmable buttons for users

LED

Onboard 6 programmable LEDs


3.2. Pinmap

Usage

FPGA

MCU

FPGA+MCU

Language

Verilog HDL/Verilog

C/C++

Verilog HDL/Verilog , C/C++

Introduction

verify HDL design

After flashing the softcore bitstream,
this board can be used as a normal microcontroller unit

After flashing the softcore bitstream,
it can be used as two chips

User

Beginner,FPGA developer

RISC-V developers,Cortex-M developers

Senior engineer

 

For more information about Sipeed Tang Nano 9K FPGA Development Board, please contact us

    We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

    To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

    To start a return, you can contact us at alex@friendlyarmtr.com. If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

    You can always contact us for any return question at alex@friendlyarmtr.com.


    Damages and issues
    Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.


    Exceptions / non-returnable items
    Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

    Unfortunately, we cannot accept returns on sale items or gift cards.


    Exchanges
    The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.


    Refunds
    We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.

    Please contact us for shipping charges and additional information.

    There are no reviews for this product yet...