Skip to product information
1 of 4


BPI Uno32 Board (BPI-A-006)

Regular price $11.74 USD
Regular price Sale price $11.74 USD
Sale Sold out
The BPI UNO 32 (also referred to as BPI UNO 32, stylised as BPI UNO 32) is an ESP32 with Xtensa 32bit LX6 single/dual-core processor based embedded system. 
BPI-UNO32 uses the ESP-WROOM-32 of espressif company as MCU. ESP32 is a single-chip solution integrating 2.4GHz Wi-Fi and Bluetooth dual mode. The 40 nanometer technology of TSMC has the best power consumption, RF performance, stability, versatility and reliability. It can deal with various application scenarios.
Two separate controlled CPU cores, the main frequency can be up to 240MHz, 448KB ROM, 520KB SRAM.
BPI-UNO32 The appearance size is fully matched with Arduino UNO R3
BPI UNO32 Interface:

BPI:UNO32 Spec

Hardware spec


Xtensa® 32-bitLX6single / dual core processor






4MB(Onboard),A maximum of 4 Flash/SRAM, each Flash maximum 16MB


5V@1AmicroUSBpoweror 5.5mm 12VDCport


12-bits SAR ADC 18 channel, 2\*8-bit D/A converter, 4*SPI, 2*I2S, 2*I2C, 3*UART, Host SD/eMMC/SDIO, Slave SDIO/SPI


802.11 b/g/n/e/i 802.11 n\(2.4GHz 150Mbps\) 802.11 e\(Quality of Service\)


BT4.2 & BLE


Passive buzzer





BPI UNO32 PIN Define:

Power supply : Micro USB(Commonly used) or DC 12V Debugging tools : IDE(uPyCraft/ESP-IDF)

Debug method: IDE for ESP32 Program download (Download the HEX file) (Need to add ESP32 board in IDE)

After the program compiles OK, you need to manually press and hold the IO0 button and then use the USB cable to link the card and the PC and then start the download. After the download is completed, release the IO0 button, and power on or reset the program code function normally.

uPyCraft burn firmware and online debugging: When using uPyCraft, you need to burn the firmware beforehand.

First select the interface in the uPyCraft ESP32 board serial port,

Then select the type ESP32, the following can choose whether to erase the flash

When the Download or EraseFlash progress bar can not continue the progress bar after the completion of the need to press down colleagues EN and IO0 then release EN and then release IO0 can be. When the firmware is burned, you need to manually reset the board once it is finished. You can select the serial port connection or click the icon to connect.

After connecting the software in the lower right side of the dialog box >>> logo.

Hardware Interface: Micro USB, DC 12V, compatible with GPIO pin layout

Table .BPI-ESP32 Pin Functions

Board left a group of 4P I2C bus can be accessed 0.96 "OLED, and with fixed holes

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.

To start a return, you can contact us at If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.

You can always contact us for any return question at

Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants), custom products (such as special orders or personalized items), and personal care goods (such as beauty products). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

Unfortunately, we cannot accept returns on sale items or gift cards.

The fastest way to ensure you get what you want is to return the item you have, and once the return is accepted, make a separate purchase for the new item.

We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method. Please remember it can take some time for your bank or credit card company to process and post the refund too.

Please contact us for shipping charges and additional information.